|
Circuit Breaker Tester SA 100S from Weis GmbH & Co. KG, Germany (www.weisgmbh.com)
The SA 1OOS Switchgear Analyser is an extremely light-weight & quick tool to check basic Circuit Breaker Timing and is an instrument intended for use in Power Station, Substation & industrial environments.
Specifications
Inputs
- Analogue: 1 x Independently controlled trip (open) and close coil current inputs
- Analogue Accuracy: <0.5% of FS
- Digital: 6 x Contact status input providing up to 3 main contact and 3 resistive contacts (dry contacts) 2 x User configurable inputs for wet or dry contact timing (24-250V DC or 0 VDC)
- Connector: 4mm Safety
Outputs
- Coil Operation: Solid state outputs for trip (open) and close
- Coil Peak Current: 5A (Accuracy 2.5mA) or 30 A (accuracy 15mA) AC/DC measurement ranges selectable via input sockets
- Coil Max. Voltage: 400V peak
- Recording Rime: Selectable up to 1 sec
- Synchronization: All inputs sampled simultaneously
- Start Trigger: Coil current or selectable on any digital input
- Display: Back lit 4 line x 40 character LCD Display with alpha numeric key pad, RJ 45 Network port, RS 232 serial port, VGA Port etc.
- Printer: Built in
- Programming: Settable Parameters
- User Strings: Site name, Breaker no. breaker type, line name & operator name .
- Test Time: Close, Open, Trip free, Close - Open, Open - Close, Open - Close - Open
- Coil Operate Times: Initial delay, trip coil "on time" close time "on time" delay time between close & opening.
Other Models of Switchgear Analysers available from us -
-
SA100
-
SA100RS (Witout inbuilt display)
-
SA100R (with reduced number of channels)
-
SA200 (Recommended for breaker manufacturers)
|
